Quartz pocket watches
They work exactly like generic quartz bracelets. To pay the date (if it is a watch function), pull the crown to the first notch and turn it in the opposite direction of the needles of a watch. To settle the time, pull the crown thoroughly (or in the second notch) and go up in the hour. Push the crown at the bottom to start the movement.
How to open and close the Gusset A valve watches
The gusset watch said to" hunting box "is fitted with a latch that starts on the edge of the front cover and maintains the closed cover. To open the watch, you press the crown (the boot button ) which is connected to the latch by a spring . To close a watch, it is important not to "break" the cover of box . In this way, the place where the hosquet will wear a wear at the place where the border of housing is located .
Mechanical gusset watches
These gusset watches depend on the energy stored in the main spring to feed the movement and must therefore be reassembled daily. < Br>
To put the watch, turn the crown in the needles of a watch of 30 to 40 half-tours until the stop. Push the crown down to the normal operating position. The reassembly and the time adjustment must be carried out daily . However, it should not be too to go up the crown , as it could damage the mechanism from spring . As part of the Automatic pocket watch , the energy of your movements during the day will feed your watch. If your watch is blocked despite the fact that you have come back, Do not hesitate to energetically shake it two to three times in order to unlock the mechanism .
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.